Checks Before Operation; Functional Test - Simon, Evers & Co K 453 304 Instrucciones De Manejo Y Mantenimiento

sliding guide or other pressure points.
 Injury caused by misuse
It is forbidden to lift or transport the load unless all clamps have fixed the drum firmly.
Lift or lower the load at a uniform speed and slowly. Sudden start or stop is forbidden.
Faulty methods of operating the machine may cause accidents
 Injury caused by machine fault
Never operate a faulty or damaged machine.
Make a thorough check before the operation every time.
Make sure all the markings are intact and correct.
Keep normal maintenance on the head parts of the clamps.

2 Checks Before Operation

Operator should make visual check on the machine before every shift work.
2.1 Make sure the operation manual is a complete and effective edition.
2.2 Make sure all the markings are intact, correct and properly affixed.
2.3 Check the following parts whether they are damaged or improper installed or have
some parts loosen and lost.
 Hydraulic system and relative parts
 Clamping parts
 Front & rear wheels
 Carriage
 Nuts, bolts and other fastening parts
2.4 check the machine on:
 Impression or damage
 Clamping parts wearing or damage
 Corrosion or oxidation
 Welding seams or cracks

3 Functional Test

Operators must make functional tests on drum stackers of different kinds of functions. Only
when the tests are eligible, can they be put into service.
5