We, EATON Industries (Austria) GmbH
declare under our sole responsibility that the product (family)
Eaton - RS232 Gateway,
CRSZ-00/01
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
based on compliance with following standard(s):
EU- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2003
Doc.Id.: CRSZ-0001_171117
CTAA-01/01
CTAA-02/01
CBEU-02/01
CSAU-01/01
CBEU-02/02
CJAU-01/01
CDAU-01/01
CRCA-00/01
CHSZ-00/01
All manuals and user guides at all-guides.com
Declaration of Conformity
3943 Schrems, Eugenia 1
Austria
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
4
17.11.2017
Fernando Ceccarelli
Friedrich Schröder
Senior Vice President
Director Quality
General Manager
& Systems
RF- SYSTEM
BASIC - MODE - CARD