Descargar Imprimir esta página

Steren AIR-210 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest
version of the instruction manual.
• Do not try to open the device, may cause damages and warranty will be void.
• Clean with a soft, dry cloth.
• Do not use solvents or other chemicals to clean the exterior of the device.
Perfect for closed areas with high humidity condensation and bad odors, it uses silica
gel, a material that can absorb several times their own weight.
An indicator shows the level of humidity absorbed, and a blocking system to avoid
water spills.
Plus, it can be used several times you just need to plug into an outlet to reestablish
the system.
• Reusable
• Compact size
• Eliminates bad odors
If you see the moisture indicator pink (wet) when unpacking the product, connect it
to an electric outlet for 12 or 15 hours to evaporate the liquid.
When you note that the elements of the indicator changed to blue (dry), follow the
next instructions.
1.
When the indicator window is
color blue, put the dehumidifier into the
cabinet, closets and other confined
spaces where you want to remove
excess moisture and bad odor.
In this process, the AIR-210 does not need electricity.
NOTE: If you want to hang up the
product, insert the hook into the rear
hole of the dehumidifier.
2.
This device has an indicator to show
how many humidity was absorbed
(pink).
3.
After a complete drying process, the
indicator window will turn blue and the unit is
ready to use again.
Input: 100-240 V ~ 50/60 Hz 22W
Consumption: 1.2 kWh/year
Stand-by power consumption: Not applicable
Product design and specifications are subject to change without notice.
Product: Electronic dehumidifier
Part number: AIR-210
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product box or
package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty
service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure
to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer.
If you are in Mexico, please give a call to our Call Center.
01 800 500 9000
To start with the regeneration process,
simply charge the unit by plugging the
unit into an electric outlet (about 10~15
hours).
WARRANTY
CONDITIONS

Publicidad

loading