Apex Tool Group Cleco 936491PT Manual De Instrucciones página 18

1
Safety
1.2 Basic requirements for safe working practices
Before using the charger for the first time, ensure that you have carefully read and understood the instruc-
tion manual. Failure to observe the instructions below may result in electric shock, fire and serious injuries.
CAUTION!
Electrical safety
Do not open the charger.

Do not modify the charger structurally.

Operate the charger in dry, enclosed rooms only.

Protect the charger from moisture and rain.

Never operate the charger under unsuitable ambient conditions (i.e. where combustible gases,

solvents, dust, vapors or moisture is present).
Do not operate the charger if the housing or power plug are damaged.

Do not charge batteries without supervising them.

Do not use damaged batteries.

Work area
Ensure that there is enough space in the work area.

Keep the work area clean and dry.

1.3 Designated use
• This charger is intended exclusively for charging Cleco lithium ion batteries order no. 936400PT, order
no. 935377.
• Do not use it in areas where there is a risk of explosion.
1.4 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1 Battery charger
1 EU power cable
1 NA power cable
1 GB power cable
1 Instruction Manual
1.5 Transport
Transport and store the charger in the original packaging. The packaging can be recycled.
1.6 Storage
Storage temperature
Relative humidity
18
All manuals and user guides at all-guides.com
EN
P2069BA/INT 2014-06
-20 °C to +60 °C (-4 °F to +140 °F)
0 to 80 %, non-condensing
69b_1_5 en.fm, 16.03.2015