LOUIS VUITTON Horizon QAB Manual página 12

Installing, storing, shipping, sailing and utilization requirements
• Operate and store this product within the temperature range of - 4°F to 113°F
(-20°C to 45°C) only. Charge the battery where the temperature is between 41°F
and 104°F (5°C and 40°C) only.
• Do not attempt to open your Louis Vuitton Horizon Earphones.
• The Louis Vuitton Horizon Earphones has a water and sweat resistance rating of IPX 4
under IEC standard.
• Do not expose to open fl ame.
• Do not drop, sit on, or allow your Louis Vuitton Horizon Earphones to be exposed
to water, moisture, or extreme temperatures.
• Do not place heavy object or use excessive force on your Louis Vuitton Horizon
Earphones buttons.
• Keep away from children.
• Keep your Louis Vuitton Horizon Earphones away from medical devices such
as pacemakers or defi brillators. As any radio-transmitting equipment may interfere
with other electronic devices.
• Clean your Louis Vuitton Horizon Earphones with a soft, slightly damp cloth. Do not use
harsh chemicals, cleaning solvents or strong detergents, do not soak , or submerge.
• It is recommended that you return your Louis Vuitton Horizon Earphones to their storage
case when not in use.
8
• Remove the Louis Vuitton Horizon Earphones periodically to allow your skin to breathe
and you ear to relax. This may limit the r isk of hearing loss and keeping the Louis Vuitton
Horizon Earphones clean and dry will reduce the possibility of skin irritation and ear
infection.
Please note that the Louis Vuitton Horizon Earphones uses Near-Filed Magnetic Induction
(NFMI) technology for connecting one ear phone to the other.
Intermittent interference or micro dropouts can be caused by numerous factors,
but common causes include, but are not limited to the following: door security systems,
bus/metro token machines, large metal objects and close proximity to other NFMI-enabled
devices.
Measures to take if equipment is not working:
Put the earphones into the charging case with USB -C power and charge them
for 15 minutes, this operation can let ear phones recover to working state.
Paired device list reset:
• Step one: take out the right earphone from charging case.
• Step two: check if white LED is blinking. If white LED is blinking, skip to step 3 ;
if it isn't blinking, press and hold multi -functional button till white LED blinking
(let earphone enter pairing mode).
9