Thermador PA12GTRG Instrucciones página 2

Gliding Oven Rack Instructions
®
Full Access
The THERMADOR gliding oven rack can be pulled out and
pushed back into the oven with minimal effort – even while
supporting a large turkey or roast. This package contains
one (1) of the following models of gliding oven racks.
Rack Model Range Sizes
PA36GTRH 36''
PA30GTRH 30'' and 48''
PA18GTRH 48''
PA36GTRG 36'' and 48''
PA30GTRG 30''
PA12GTRG 48''
WARNING
To help prevent burns, NEVER remove or reposition the
oven racks while the oven is ON or while the oven is
cooling. Do not reposition until the rack cools to room
temperature.
WARNING
State of California Proposition 65 Warnings:
This product contains chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
IMPORTANT:
Always remove the gliding oven racks before self-cleaning
the oven. If the gliding racks remain in the oven during Self
Clean, lubricants in the glide mechanisms of each rack will
be lost and the finish will discolor.
Oven Racks
Range Series
PRO HARMONY
PRO HARMONY
PRO HARMONY
PRO GRAND
PRO GRAND
PRO GRAND
Placing Rack in Oven
®
®
IMPORTANT: When placing the gliding rack in the oven,
make sure the front supports on the rack guides rest in
the large slots at the front corners of the rack. This is
necessary to keep the rack in the correct position while
fully inserted into the oven.
Removing Rack from Oven
To remove or reposition a rack in the oven, pull the rack
toward the front of the oven. Lift up the front of the rack
over the safety stops and pull the rack from the oven.
1. Hold the rack on a
slight angle. Place
the safety hooks
under the front of
the rack guides.
2. Push the rack into
the oven, lifting
the rack stops
over the front of
the rack guides.
3. Hold the rack
straight.
4. Push the rack in
until it is even with
the front hooks.
5. Lift the rack up.
6. Push the rack in
completely.
7. Engage the rack's
front hooks on the
rack guides.