Publicidad
Idiomas disponibles
Idiomas disponibles
Stecksystem ORION PLUS
Rear wall grilles
Dear Customer,
Please note our installation and operating instructions for the
"ORION PLUS" push-together system (in the relevant current
version).
It is absolutely necessary to follow the installation instruction exactly,
in order that the components meet your needs and maintain their
functionality in future.
1. Place the rear wall grille between frame elements.
2. Position the upper safety strip approx. 300 m from the top edge
of the shelving unit from the outside. Suspend slightly diagonally
between the frame profiles and the rear wall grille.
If a shelf is positioned at the same location(s) the safety strip
should be fitted above or below the shelf.
Shelving unit height
2000 mm
2500 mm
3000 mm
3. Fit the bottom safety strip in the same way as described in Item
2, approx. 200 mm from the floor.
4. Distribute the remaining safety strip(s) evenly between the top
and bottom rails, following the instructions in Item 2.
H-RWG/10
GB
Safety strips
pieces
3
3
4
Publicidad
