Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Atmos™ QRG
What Is
Included
AC Power
AC Plug
Resetting the
Breaker
DMX Linking
DMX Connection
All manuals and user guides at all-guides.com
·
Atmos™
·
Neutrik® powerCON® power cord
This product comes in two models, each with a fixed input voltage power supply,
either 120 V, 60 Hz or 230 V, 50 Hz. Be sure you have the correct model for the
line voltage in your area.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Connection
Wire (U.S.)
AC Live
AC Neutral
AC Ground
Green/Yellow
This product is equipped with a resettable circuit breaker. If the breaker trips, all
sections of this product will lose power. To reset the breaker:
1. Disconnect this product from power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, you may attempt to reset the breaker by pressing the button
with your finger.
4. Plug the product's power cord into the power outlet and continue using as
recommended.
The Atmos™ will work with a DMX controller using a 3- or 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
The Atmos™ uses a 3- or 5-pin DMX data connection for its 1 channel DMX
personality. See the User Manual for information about connecting and
configuring the product for DMX operation.
·
Warranty Card
·
Quick Reference Guide
Wire (Europe)
Black
Brown
White
Blue
Green/Yellow
3
EN
Screw Color
Yellow/Brass
Silver
Green
Publicidad
Tabla de contenido
