Resumen de contenidos para Humanscale Thin Client Holder
- Página 1 Thin Client Holder Assembly Instructions North America: +1 800 400 0625 Europe: +353 (0)1 858 0910 Asia Pacific: +8522581 0570...
- Página 2 Tools Required ① Drill with Phillips Head Driver bit Parts Included ② ③ ④ ⑤ 5mm Hex Key Cable Management Surface Mounting Mounting Cleat Clip Screws ⑥ ⑦ Beam Bracket Beam Mounting Screws Assembly Instructions Using the included 5mm hex key, loosen the adjustment screw to pull the two halves apart. ⑧...
- Página 3 Insert your thin client into the holder with the front facing the same side as the Humanscale logo. Squeeze the two halves of the holder together and re-tighten the adjustment screw. ① Remove the mounting cleat from the thin client holder.
- Página 4 (If using Beam Mount): Using the two M5 screws, attach the mounting cleat to the beam bracket. Then, using the 4 mounting screws, attach the beam bracket under the desk in the desired location. Ensure that there is enough clearance on all sides for the thin client and holder. ①...
-
Página 5: Outils Nécessaires
② Consultez la page 3, parte delantera orientada hacia el mismo lado que el logotipo de Humanscale. (Si vous optez pour un montage en surface) : Presione las dos mitades del soporte entre À l’aide des vis fournies, fixez le taquet de sí... -
Página 6: Erforderliche Werkzeuge
Montage-instructies Montieren Sie Ihren Thin Client so in die Halterung, dass seine Vorderseite und das Humanscale-Logo auf der gleichen Seite sind. Draai de afstelschroef los met de meegeleverde 5 mm inbussleutel om de twee Drücken Sie die zwei Seiten der helften van elkaar los te maken. -
Página 7: Utensili Necessari
Istruzioni per il montaggio Utilizzando la chiave esagonale da 5 mm inclusa, allentare la vite di regolazione per separare le due metà. ⑧ Vedere pagina 2, Inserire il thin client nel contenitore con la parte frontale rivolta verso il logo Humanscale. - Página 8 For our terms and conditions please go to https://www.humanscale.com/about/legal-information/terms-conditions.cfm © 2021 Humanscale Corporation. The text and artwork are copyrighted materials. All rights reserved. The Humanscale mark and logo are trademarks of Humanscale Corporation and are registered in the United States and certain other countries.