FRAM CF11920 Guia De Inicio Rapido

CF11920
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application:
2013 Ford Escape
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
28399 Cedar Park Blvd.
Perrysburg, OH 43551-4864 U.S.A.
©2014 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: 7/64 Allen Wrench
LOCATION OF CABIN FILTER: The filter is located under the glove box on the right side of the middle console.
1 2-2014
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION
15 minutes or less
15 minutes ou moins
1. There is a cover under the glove box that must be removed to access the filter housing.
15 minutos máx.
2. Squeeze the sides of the two screw clips to remove them from the cover. (Fig 1)
3. Pull down on the panel to remove it from the vehicle.
4. Using a 7/64 Allen Wrench remove the screw that secures the bottom of the housing cover to the housing. (Fig 2)
5. Push in on the two side clips to remove the filter housing cover. (Fig 3)
6. Pull out on the old filter to remove it from the housing. (Fig 4)
7. Pinch the middle of the new filter to maneuver it into the housing. (Fig 5)
8. Insert the new filter into the housing with it's airflow indicator arrow pointing towards the cabin and make sure it expands back to
fill the housing.
9. Clip the cover back onto the housing and make sure the tabs re-engage.
10. Reinstall the 7/64 screw that secures the housing cover to the housing.
11. Reinstall the bottom panel and attach the screw clips back onto the screws.
Fig 1
Fig 2
Fig 4
Fig 3
Fig 5