Control Panel - Soleusair FC1-38R-21 Manual Del Usuario

OPERATING INSTRUCTIONS
Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet.

CONTROL PANEL

POWERING ON THE FAN
The fan can be turned by pressing the POWER button on the fan control panel or using
the supplied remote control. The POWER button is also used to turn the fan off.
FAN SPEED
The default fan speed is low. To increase the fan speed to medium or high, press the
SPEED button on the fan control panel or the remote control. By pressing the SPEED
button, the fan will cycle through the 3 fan speeds until the desired speed is selected.
OSCILLATION
The fan can operate in oscillation or stationary mode. Press the OSCILLATE button on
the control panel to start oscillation, or press the OSC button on the supplied remote. To
turn Oscillation off, simply press the OSCILLATE button or OSC button once more.
WIND MODES
Press the MODE button on the fan control panel or remote to select one of the three
wind modes. When the fan is initially powered-on, the default wind mode (normal) is
selected. Press the MODE button once to select Natural wind mode, and twice to select
Rhythm wind mode. During Natural wind mode, the fan will simulate the airflow of the
wind by randomly alternate through its 3 fan speeds. During Rhythm wind mode the fan
cycles through the fan speeds in order of Low, Medium, and High.
IONIZER
This fan is equipped with a built-in ionizer to help clean the air around you. To operate
the ionizer, press the IONIZER button on the fan control panel or the supplied remote
control. To turn off the ionizer, simply press the IONIZER button again.
5