Technical Data - STERWINS HSWC.2 Instrucciones De Montaje, Utilización Y Mantenimiento

2.4 HYDRAULIC POOL CLEANER SAFETY WARNINGS
• Make sure that the suction equipment installed in your pool and to which you connect
the hydraulic robot complies with current safety standards.
• Do not obstruct the pool's suction nozzles, the robot suction mouth, or the cleaner
hoses with any part of your body.
• Keep your hair, loose clothing, jewelery, etc. away from the suction nozzles.
• Regarding vinyl-lined swimming pools: before installing your new robot cleaner,
carefully inspect your pool lining. If the liner crumbles in places, or if you notice gravel,
folds, roots or corrosion due to metal on the underside of the liner, or if you notice that
the underlying surface (bottom and walls) is damaged, do not install the robot until
you have had the necessary repairs or replacement of the liner done by a qualified
professional.
2.5 SERVICE
• Have your product serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
• Have the product checked by a qualified professional and repaired, if necessary, before
you operate it again.

3. TECHNICAL DATA

Model
Hose length
Total hose length
Hose diameter
Maximum dirt filtering capacity
Max length of pool
Min depth of pool
Max depth of pool
Max surface of pool
Max volume of pool
Max chlorine quantity
Allowed Water pH level
Pump power (minimum required)
Pump power (optimum performance)
Maximum pump power
Robot movement speed
Pack dimensions
Machine dimensions
HSWC.2
80cm
9m60
38mm
10mm
32m
128m
5ppm
250W
375W
750W
180 m/h
83cm X 43.5cm X 16.5cm
45cm X 45cm X 34cm
113
8m
1m
4m
2
3
7-8
FR
ES
PT
IT
EL
PL
UA
RO
BR
EN