Step-By-Step Instructions For Using The Auto-Iq Programs - Ninja CS960 Serie Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step-by-Step Instructions for Using the Auto-iQ
WARNING: Place the vent hole on the lid facing away from you.
WARNING: Use oven mitts when moving the unit, opening the lid, and inserting or removing food.
NOTE: For all Auto-iQ programs, when the countdown timer reaches zero, the unit will beep 3 times and then switch to Stay Warm for up to 12
hours. Alternately, you can press the START/STOP button to stop cooking prior to the end of your set program (the unit will NOT switch to Stay
Warm in this case). If you press the START/STOP button accidentally, you can press it again within 5 seconds to resume the set program time.
NOTE: For all Auto-iQ programs, when you are ready to turn off the unit, press the Power button. The Temp/Time display will show the word OFF. If
you accidentally press the Power button, you can press it again within 5 seconds to resume all prior settings.
Auto-iQ Recipes:
Please reference your cookbook for detailed ingredients, directions, and
recipe numbers. Place the cooking pot into the main housing of the unit.
Then plug in the unit and turn it on.
• Quick Meals
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Choose a Quick Meals recipe from the included cookbook and
add your ingredients to the cooking pot.
3
Press the QUICK MEALS button.
4
Turn adjustment knob to select the Auto-iQ recipe number.
5
Once you have selected the recipe number, press START/STOP
to start the cooking time.
• Layered Bowls
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Choose a Layered Bowls recipe from the included cookbook.
3
Follow the Stove Top directions in the recipe to saute and
brown the first batch of ingredients.
NOTE: See the following page for detailed instructions on using
the Stove Top function.
4
Add the remaining ingredients.
5
Press the LAYERED BOWLS button.
6
Turn the adjustment knob to select the Auto-iQ recipe number.
7
Once you have selected the recipe number, press START/STOP
to start the cooking time.
• Grains
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Choose the type and amount of grain from the Grain Chart in
the cookbook.
3
Place ingredients in the pot according to the directions on the
Grain Chart in your cookbook.
9
1-877-646-5288
Programs
4
Press the GRAINS button.
5
Turn the adjustment knob to select the program number listed
in your cookbook.
6
Once you have selected the recipe number, press START/STOP
to start the cooking time.
7
The TIME/TEMP Display screen will display "ON". A countdown
timer will begin as soon as there is 5 minutes left in the Grains
program.
• Poached Infusions
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Choose your desired ingredients from the Poached Infusions
Section in the cookbook
3
Before placing ingredients inside the pot, please refer to the
directions on the Poached Infusions Chart in the cookbook.
4
Press the POACHED INFUSIONS button.
5
Turn the adjustment knob to select the program number listed
in the Poached Infusions in your cookbook.
6
Once you have selected the recipe number, press START/STOP.
7
For Auto-iQ Recipes Poached Infusions, it will display "P"
indicating the unit is pre-heating.
8
As soon as the program is preheated, the unit will beep three
times and display "Add".
9
Add your ingredients to poach, and press the flashing Start/
Stop button.
Stay Warm and Auto-iQ Auto Shutoff for Auto-iQ
Programs:
As a safety feature, the unit will automatically shut off based on the
setting that has been selected.
When in any of the Auto-iQ modes, at the end of the cooking cycle the
unit will automatically switch to Stay Warm for 12 hours. At the end of
the 12 hours, the unit will automatically shut off.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido