Medisana 52345 Instrucciones De Manejo página 61

7.7 Alarm - E-Mail Settings
Is the option "Send Mail on Alarm" (see chapter 7.6 Alarm - Alarm Settings) activated,
you need to enter the following information. Only then you can receive an E-Mail with
5 photos in case of an alarm:
Sender
Name of sender to be shown upon receipt of the E-Mail (e.g. SBM Louisa).
Receiver
In case of alarm, you have the option to let the program send E-Mails to max. 4 re-
ceivers. Enter the E-Mail-addresses in the fields.
Enter the address of the Outgoing Mail Server (SMTP Server) of the sending E-
Mail-Address (e.g. smtp.t-online.de).
Enter the respective Port of the Outgoing Mail Server (default: 25)
Select the safety protocol for the transfer of the E-Mail; if necessary change the port
accordingly.
If the Outgoing Mail Server needs authentification, activate this option and enter your
user name and password. You may check your values by clicking "Test".
Activate "Report Internet IP by Mail", if the external IP address should be informed
in the E-Mail.
Click „Submit" to save the settings.
7 The web-interface
GB
G
G
G
G
G
G
G
G
G
G
21
GB