GINGKO Octagon One Plus Manual De Usuario Rápido página 3

PRODUCT OPERATING INSTRUCTION
Note: The light and clock function work independently. So you don't need to turn on the
clock in order to have the light work or to turn on the light in order to make the clock work.
- Turn On or Tun Off the Light
1. A short touch or tap of light button will turn on the light. See diagram as below.
2. Keep touching or tapping the light button to choose your
preferred light intensity (total in 4 different intensities).
3. Tapping or touching the light button again when the light
on its 4 intensity will switch off the light.
th
4. To turn the light back again, follow the same steps as above.
- 12/24 Hour Format, Time and Sound Activated/Permanent Clock Display Setting
SET
1. A long touch on the button for 3-5 seconds until a beep to access to the setting
menu and either 24H or 12H display will flash on the display screen.
2. A short touch or tap on the button to select your preferred hour format, then a short
touch or tap on the SET button to confirm and the HOUR number will flash.
3. Touch the button to scroll up the hour number and set your preferred hour time, then
SET
short touch the button to confirm and the MINUTE number will flash.
4. Short touch the to scroll up the minute number and set your preferred minute time,
SET
then short touch button to confirm and the screen should show oN:Sd or - -:Sd;
oN:Sd
- -:Sd
5. Touch the to select your preferred clock display mode between oN:Sd and - -:Sd,
then touch SET to confirm and exit the setting menu.
NOTE: the setting menu will be automatically logged out after 20 seconds if there isn't any touch
operation followed from the previous touch. You should restart the setting again if that happens
before you finish the setting.