MAIN TECHNICAL SPECIFICATIONS
MODEL:
VOLTAGE:
POWER:
TYPO OF LAMP:
PROTECTION AREA:
LENGTH OF THE CABLE:
MEASURES:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the moskito killer.
We recommend all installation, operating and safety instructions appearing in this manual to be
read before installation or operation.
The moskito killer is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the device into a properly grounded electrical outlet of
the correct voltage, size, and plug configuration. If the plug
and receptacle do not match, contact a qualified electrician to
determine the proper voltage and size, and install the proper
electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
WORTHY INFORMATION
Keep these instructions for future reference.
WARNING
!
39135
220-240 V/50-60 Hz
35 W
2 x 15 W
60 m
2
115 cm
42x23,8x17,3 cm
1,36 Kg
33