Making A Call - MSI FD-100 Manual Del Usuario

All manuals and user guides at all-guides.com
2. Connect/Disconnect
Connect: Every time you re-start the device, you should press and hold the
link button until two beeps (low-high) to make the connection between your
phone and the Car Kit. The red LED flashes 3 times every 3 seconds.
Standby mode: In order to save the power consumption, the device will
switch to standby mode from connecting mode automatically. The red LED
flashes once every 3 seconds.
Disconnect: In the standby mode or connecting mode, press and hold the
link button until 2 beeps, (high-low). The red LED is off.
3. Calls
Answer a coming call
1. When you receive a call, the Car Kit rings, and the red LED fast flashes 3
times every 3 seconds.
2. Press the main button to answer the call.
3. You can answer the coming call by your phone for your privacy. The
voice remains on the phone. Follow the phone user guide to transfer the
voice to the Car Kit.
Terminate a call
Press the main button during the talking mode to terminate the call.
Reject a coming call
When you receive a call, long press the main button to reject the call.

Making a call

When the Car Kit is connected to your phone, make a call by using
your phone in the normal way.
Making a voice dialing
If your phone supports voice dialing and it is activated, you can use this
feature with this Car Kit.
1. Refer to the phone user guide to enable the voice commands on your
phone;
2. On standby mode, briefly press the main button. Wait for the tone that
indicates you can say the name as you recorded on your phone.
Redialing
During the standby mode, long press the main button to redial the last call.
4