Yale YPKP4C Manual Del Usuario página 2

Installation:
- Fix the upper screw on the wall and open the battery copartment for fixing the second
screw
- Insert battery and close the battery compartment
-
Pairing with operator:
Factory setting of the code: 1234
1. Press „CODE" at the operator until the red LED-dot in the lower right corner switches
on
2. Choose channel that you want to pair on the keypad and entert he factoru code and
press „ENTER" on the keypad
Example: Channel 1 = 11234+ENTER
3. Press „ENTER" again
Change factory code:
- Enter channel and factory code and press „*"
- Enter your new code (4 digits) and press „ENTER"
- Enter new code again and press „ENTER"
Example: Change code of channel 1 from 1234 to 5678:
11234* 5678 „ENTER" „5678 ENTER"
2