Publicidad
Idiomas disponibles
Idiomas disponibles
Models: EINSOLAR5Y, EINSOLAR10Y
1.
Product Overview
H
/RS485/DRED
Dimension:W×H×D=425×346×160mm
2.
Packing List
!
Mounting
Mounting
Inverter
Bracket
Accessories
1
1
1
3.
Installing
Installation Requirements
1. Please install the inverter(s) in places that can avoid
inadvertent contact.
2. Please install the inverter on solid/smooth surfaces.
3. The inverter(s) should not be installed near inflammable or
explosive objects.
AVOID
Direct
Rain
Snow
Sunlight
Exposure
Lay up
w
1
4
6
2
3
5
7
DC Plugs
Wi-Fi /GPRS stick
MC4 or D4
(optional)
(optional)
2
1
1
!
Cable Specifications
No
Item
1
2
3
4
Meter/RS485
D
5
DRED
3.1
Mounting
3.1.1 Use the mounting paper guide to mark holes on the wall,
Drill three holes in the marked position of 10mm diameter and 70mm depth
3.1.2 Fix the expansion bolts and mount the main bracket with the screws in mounting accessories
3.1.3 Attach the inverter to the mounting bracket. Mount the supporting bracket at the bottom of the inverter
3.1.4 Check both sides of heat sink and ensure the inverter is stably attached
3.1.5 Use M5 screw ( torque:2.5Nm ) to attach the heat sink fins to the munting bracket
3.1.6 It is recommended to attach an anti-theft lock to the inverter
Step 1
Documents
1
3.2
Object
Description
Housing
1
2
3
M5×13 pan head screw
Type
Outdoor copper cable
• Conductor cross-section: 4-6 mm²
• Conductor cross-section: 4-6 mm²
Outdoor copper cable
• Conductor cross-section: 2.5-6 mm²
• Cable outer diameter: 5-8 mm
• Conductor cross-section: 0.14-1.5 mm²
CAT-5E, outdoor shielded cable
• Cable outer diameter: approx. 9 mm
Standard for EIA/TIA 568B
• cable maximum length 1000m
Step 2
160mm
Step 4
12-18 mm
9
Step 3
Step 5
1
2
3
Publicidad
