Publicidad
Idiomas disponibles
Idiomas disponibles
Quick installation guide
EINSOLAR36Y, EINSOLAR50Y
1.
Product Overview
1. LCD&LED or LED
2. DC switch (optional)
3. PV Terminal (s)
4. COM1: Wi-Fi / GPRS
Stick(optional)
5. COM2: RS485 Terminal
6. COM3: Meter / DRED Terminal
1
7. AC Terminal
8. Second PE Terminal
Dimension:W×H×D=580 x 435 x 242mm
2.
Packing List
DC Plugs
Mounting
Mounting
Inverter
(Sealed)
Bracket
Accessories
*6 pairs for EINSOLAR36Y
3.
Installing
Installation Requirements
1. Please install the inverter(s) in places that can
avoid inadvertent contact.
2. Please install the inverter on solid/smooth
surfaces.
3. The inverter(s) should not be installed near
inflammable or explosive objects.
AVOID
Direct
Rain
Snow
Sunlight
Exposure
Lay up
W
H
5
6
2
3
4
7
8
AC connector
Meter Plug
Wifi Stick
Documents
(optional)
box
(optional)
1000mm
Cable Specifications
No
Item
1
PE cable
2
AC Output
cable
3
DC Input
cable
D
4
Meter/DRED
3.1 Mounting
3.1.1. Use the mounting bracket as a template mark and drill holes of 10mm diameter and 70mm depth
3.1.2 Fix the mounting bracket with the screws and expansion bolts packed in mounting accessories
3.1.3 Attach the inverter to the mounting bracket
3.1.4 Check both sides of heat sink and ensure the inverter is stably attached
3.1.5 Use M5 screw (with cross screwdriver, torque: 2.5Nm) to attach the heat sink fins to the mounting
bracket
3.1.6 It is recommended to attach an anti-theft lock to the inverter
φ10mm(4X)
489mm
Deep 70mm
3.2
Installing the PE Cable
A second PE terminal is equipped at the bottom of the inverter.
Ensure the PE terminal is reliably grounded and the grounding
resistance is less than 10 Ohm.
Object
Description
Housing
1
2
M6 terminal lug with protective conductor
3
M6×16 screw SUS304
Tighten it firmly into the housing (Cross screwdriver, torque: 3Nm).
NOTICE
Proper grounding connection of the second PE terminal and the AC terminal is mandatory. NOT
properly connecting both PE will void all product warranty.
Type
Specifications
Single-core outdoor copper cable
• Conductor cross-section: ≥ 16mm²
• Conductor cross-section: L/PE: 16mm²
Outdoor copper cable
• Cable outer diameter: 21-51 mm
Standard outdoor PV cable,
• Conductor cross-section: 4-6 mm²
PV1-F Model recommended
• Cable outer diameter: 5-8 mm
Two-core outdoor shielded
• Conductor cross-section: 0.14-1.5 mm²
twisted pair cable
• Cable outer diameter: approx. 4-6 mm
489mm
2
3
N: 6mm²
1
Publicidad
