Publicidad
Idiomas disponibles
Idiomas disponibles
Quick start guide
English
Reference
KT 320
Temperature, humidity, current, voltage, electric pulses
KTT 320
KCC 320
Temperature, humidity, atmospheric pressure, CO
KPA 320
Temperature, humidity, atmospheric pressure
KP320, KP321
Operating temperature, protection of the instruments and information about storage and the battery
•
Operating temperature*: KT320: from -40 to +70 °C; KTT320: from -20 to +70 °C; KCC320,
KPA320, KP320 & KP321: from 0 to 50 °C
•
KT320: IP65; KTT320: IP54; KCC320, KPA320: IP40, KP320, KP321: IP65*
•
Storage temperature: from -40 to +85 °C
Battery power supply: 2 x lithium AA 3.6 V batteries
1
Display
°C: Temperature in °Celsius.
°F: Temperature in °Fahrenheit
%RH: Relative humidity
2
Dimensions (mm)
KT320
KTT320
*With the pressure connectors plugged
Parameters
Temperature
2
Differential pressure
DATASET is finished.
END
REC
Indicates that one value is being recorded.
It flashes: the DATASET did not start already.
FULL
Flashing slowly: DATASET is between 80 and 90% of the storage capacity.
Flashing quickly: DATASET is between 90 and 100% of the storage capacity.
Constant: storage capacity full.
BAT
Constant: indicates that the batteries have to be replaced.
1 2
Indicates the channel number which is measuring.
3 4
ACT
Screen actualisation of measured values.
MIN
The displayed values are the maximum/minimum values recorded
MAX
for the channels displayed.
Indication of the direction of exceeding the threshold in the
recorded measurement
KCC320, KPA320
KP320, KP321
3
Connections
PC connection
KT 320: 2 mini-DIN connections
KTT 320: 4 mini-thermocouples
connections
KP320, KP321: Two pressure
connections
5
Recorder fuction
Five recording modes
KISTOCK can record in 5 different ways:
• "Immediate" mode records values according to a predefined interval.
• "Minimum", "Maximum" and "Average" record automatically the calculation of minimum, maxi-
mum or average of measured values during an interval of recording.
• "Monitoring" mode allows to get an accurate history report during error events to help troubleshoot-
ing, without stopping the measurement logging. To proceed this way, you just have to define:
- a record interval to be used whilst the readings are beyond the setpoints
- a record interval for the values measured during each reading beyond the setpoints
• Furthermore, you can also let your KISTOCK record non-stop ("loop" recording option).
Four types of dataset start
Once your recording mode has been set, you can launch your dataset:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
• With "Online" option. In this case, your datasets are directly sent, saved and displayed on your PC in
real time.
Six types of dataset stop
You can stop your dataset:
• According to a date and time (if it was started the same way)
• According to a period
• According to a predefined number of recording points
• Once the storage capacity is full
• With "Stop" option of the software
• By holding "OK" key during 5 seconds, if this function has been previously activated by the software
Micro-USB
connector
Publicidad
