Akai ACI-6 Manual De Usuario página 16

OPERATING INSTRUCTIONS
Setting time using iPhone / iPod time Sync
The clock radio time sync feature allows you to sync the time setting
on the clock radio to the time from you iPhone or recent model iPod
(iPod touch / iPod nano and iPod classic; older iPod models such as
iPod mini do not support this feature).
1. Plug the AC adaptor cable into the AC adaptor jack located at the
back of the unit, time sync flashes on the lower part of the display.
2. Once sync is completed, time updated will appear on the display.
3. If sync was not successful, If this happens, please try again with a
different iPhone / iPod if needed.
iPhone time is automatically updated to the correct time via cell
phone towers, the time on you iPod is accurate only to the time on the
computer the last time the iPod was synced to it. It's possible to have
up to 59 seconds difference between the clock radio and synced iPod
/ iPhone.
Setting Clock Time (manually)
With the power off, press and hold the clock set / memory button ; "12
Hr" will blink. Press the Tune UP or Tune DOWN button to set the unit
to the 24 hour (24 Hr) mode or 12 Hour (12 Hr) mode.
Press the clock set / memory button and the hours will blink.
Press the Tune UP or DOWN to set the current hour, then press the
clock set / memory button again; the minute digits will blink. Press the
Tune UP or Tune DOWN to set the current minutes.
When done and you press clock set / memory button once again and
the display time will blink 4 times to indicate the current time is set.
All manuals and user guides at all-guides.com
15