Descargar Imprimir esta página

Cleaning/ Maintenance Instructions - Optimus H-8411 Manual De Instrucciones

Calentadora ultra-delgado de cuarto de micathermic

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INSTRUCTIONS:
PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS
Thank you for choosing an Optimus heater. To ensure the best performance from your heater, please read and
save the following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING THE
FOLLOWING:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use grip handle
when provided.
Keep combustible materials such as drapes, furniture, pillows, bedding, papers, clothes, and curtains at
least three (3) feet (0.9m) from the front of heater and keep them at least 1 foot (0.3m) from the sides and
rear of the heater.
Extreme caution is necessary when heater is used by or near children or invalids and whenever the heater
is left operating and unattended.
Always unplug heater when not in use.
Do not use any heater with a damaged cord or plug or after heater malfunctions or has been dropped or
damaged in any manner.Discard heater, or return to authorized service facility for examination, electrical
or mechanical adjustment, or repair. (See Warranty for information)
Do not use outdoors.
This heater is not to be used in wet or damp locations such as bathrooms, laundry areas or other similar
indoor locations. Never locate heater where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners,or similar coverings. Do not
route cord under furniture or appliance. Arrange cord away from traffic area where it will not be tripped
over.
To disconnect heater, turn control to OFF then remove plug from outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric
shock or fire or damage the heater.
To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces,
like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or
flammable liquids are used or stored.
Use this heater only as directed in this manual. Any other use not recommended by the manufacturer may
cause fire, electric shock or injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable
power tap (outlet/power strip).
Keep this heater clean. DO NOT allows foreign objects to enter any vent or exhaust opening. This may
cause shock, fire, or damage to heater.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety .
Children should be supervised to ensure that they do not play with the appliance.
If the heater will not operate: See specific instructions in Safety Feature explained in this manual.

CLEANING/ MAINTENANCE INSTRUCTIONS:

During Season Care:
Before cleaning, be sure to turn off and UNPLUG the heater.
Clean the Heater with a vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt
from the inside of the heater
Do not immerse the Heater in water.
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
Store heater in a cool and dry location with power cord properly secured.
Please store the unit in its original carton or suitable container.
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
Carefully remove your heater from the box (please save the carton for off-season storage).
Make sure the unit is in the OFF position before plugging the heater into the outlet.
Put the heater on a flat and stable surface.
SETTING UP THE HEATER
Take out the four truckles, four wheel brackets, four fixed screws, four flat-gaskets and four
spring-gaskets.
According to Figure 1, Firmly install the truckle onto the wheel.
According to Figure 2, install the wheel-bracket using the bottom of the product's front and
back panel.
Figure 1
Figure 2
Fixing screw
Truckle
Flat gasket
Spring gasket
Wheel bracket
Standard screw
Spring gasket
Flat gasket
Wheel bracket
Heater

Publicidad

loading