Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Battery type: Rechargeable Lithium Ion
Rated input voltage / capacity: DC 5V – 1000mAh
Rated output voltage / capacity: DC5V – 1000mAh
Battery capacity: 2600 mAh
Recharging time: 4 hours
Power output time: appx 3 hours
Operating temperature: 10ºC - 40ºC (50ºF-104ºF)
Charging your Power2Go
Please note: Before using your Power2Go for the first time, please charge it for a full 4
hours. This unit requires 3-4 full charge and drain cycles before the battery is optimized
to its full potential. The unit should be recharged every 3 months when not in use.
Insert the regular USB end into the output USB jack of computer or wall outlet
adaptor
Insert the Micro-USB end into the input port on the Power2Go
The flashlight button will turn red showing it is charging
The flashlight button will turn blue once fully charged
Charging your Device
Please note: Always check the voltage compatibly of your device before connecting to
the Power2Go.
Insert your device's regular USB charging cable (not included) into output port on
the Power2Go
Insert the other end into your electronic device
Your device should indicate that charging has started
When you are finished charging be sure to remove the USB cable from the
Power2Go otherwise it will continue to drain power from the unit
Safety Precautions
Please note: Improper use may result in product damage, decreased battery life and loss
of charging capacity not covered by the manufactures warranty.
Check device voltage for compatibility before use
Only charge the unit from your computer or a certified approved power adaptor
(certification depends on your region)
Do not store Power2Go in high or low temperature environments, small enclosed
areas without ventilation or place in fire
All manuals and user guides at all-guides.com
Publicidad
