Lindy 32166 Manual De Usuario página 5

User Manual
Installation
Before starting the installation, please ensure that all devices are powered off.
1. Connect a USB keyboard and mouse to the USB HID ports on the rear panel of the unit.
2. If required, connect speakers or headphones to the 3.5mm audio out port on the rear panel of the
unit.
3. Using USB 2.0 A to B cables (not included, suggested max length: 3m (9.84ft)), connect 4 PCs to
the KV switches' USB PC ports.
4. If required, using 3.5mm audio cables (not included), connect the source PC's audio connection
to the KM switch's audio input ports.
5. Once all connections are made please connect the power supply and power on all devices.
6. The KM Switch registers as a Virtual HID device to the USB host.
Operation
Computer port selection can be made using the push buttons on the front panel, via hotkey commands
or via the Mouse Roaming function.
Depending on the configuration, only the KM ports (USB keyboard and mouse) or KM and USB 2.0
and/or audio ports are switched.
To learn more about these features, please refer to the keyboard hotkey switching options below.
Keyboard Hotkeys
Hotkey commands can be activated pressing leading code "Ctrl" + "Ctrl".
Hotkey
Leading code + "Alt"
(hold) + "Q" + "1" ~ "4"
Leading code + "Alt"
(hold) + "Q" + "0"
Leading code + "1" ~ "4"
Leading code + "0"
Leading code + "F5"
Leading code + "A"
Leading code + "F7"/"F8"
Leading code + "U"
Function
Mouse Roaming On (Default), please refer to Mouse Roaming settings
below.
Mouse Roaming Off.
Switch to port 1 ~ 4.
Return to last selected port.
Bind (Default) / Unbind audio.
Force audio to follow the currently selected port.
Unbind / Bind the first (F7) and the second (F8) USB 2.0 port.
Force USB 2.0 ports to follow the currently selected port.
English