eufy Security T8213 Guia De Inicio Rapido página 27

3.5 Connect the Doorbell Wires to the Doorbell
Connect the wires to the terminals at the back of the doorbell, then tighten
the terminal screws. Wire can connect to any terminal.
What you need: Wires and Wire Nuts (Optional), Video Doorbell, Philips-
head Screwdriver
Note:
• To prevent short-circuiting, make sure the wires are not touching each
other after connecting them to the terminals.
• If the wires are too short, use the extension wires and wire nuts provided
to make them longer. Use electrical wiring tape instead if there is no more
space on the wall for wire nuts.
24 EN
eufy Security Video
Extension Wires and
Doorbell Dual (Battery)
Wire Nuts (Optional)
Phillips-Head
Screwdriver
(Not provided)
Model: T8213