Project E Beauty PE098 Manual Del Usuario página 15

Follow these steps when performing a treatment:
1
Clean the device with a soft wet cloth
and carefully cleaning the electrodes
and LED cover.
2
Plug the unit in, or use a charged
device.
3
Press the Power button to turn the
unit on.
Repeatedly press to increase the
intensity; the higher the number, the
higher the intensity.
Note: The device is e ective at all
intensity levels including the lowest
setting. It is not necessary to use the
highest power level to achieve
maximum results.
4
Repeatedly press the LED Select
button to select the desired LED
e ect. See page 3-4 for detailed
descriptions of the LED e ects.
Use of the Device
15