Description; Overview; Operation; Adjust The Depth - GreenWorks TMF301 Manual Del Operador

EN
1

DESCRIPTION

1.1

OVERVIEW

1 Shaft depth adjustment
collar
2 Steering tension knob
3 Prop shaft tilt release
lever
4 Clamping knobs
2

OPERATION

Make sure the blower tube is in position before operation.
2.1

ADJUST THE DEPTH

1. Hold the shaft tightly.
2. Loosen the steering tension knob (2) and depth collar
knob (1) until the shaft moves freely.
3. Move the motor to the desired depth.
4. Tighten the depth collar knob (1) to attach the motor in
place.
5 Boat mounting bracket
6 Tilt/Twist tiller handle
7 Adjustable shaft
8 Propeller
9 Motor
WARNING
English
When you set the depth, make sure the top of the motor is
submerged at least 12" (30 cm) to avoid churning or
agitation of surface water. The propeller must be fully
submerged.
Do not operate your motor when it is out of the water.
2.2

ADJUST THE BRACKET

You can lock your motor in a vertical position, angle it for
shallow water or tilt it completely out of the water.
1. Grasp the shaft tightly.
2. Depress and hold the tilt lever (3).
3. Tilt the bracket (5) to the desired position.
4. Release the tilt lever (3).
4

IMPORTANT

CAUTION