Remote Control - FONESTAR BOX-35LED Manual De Usuario

EN

REMOTE CONTROL

: mutes the speaker.
1.-
2.- / :
- USB/microSD/Bluetooth modes: a short press skips to the previous/next
song. A long press performs a fast rewind/fast forward of the song.
- radio mode: a short press will tune to the previous/next stored station. A
long press tunes the previous/next frequency to a good signal level.
- AUX mode: no function.
3.- EQ: select different eq: Flat (no eq), Pop, Rock, Jazz, or Classic.
4.- REC: In USB mode one press records the microphone signal to the USB
device or microSD card. For more information, please refer to the section
MICROPHONE RECORDING.
5.- MODE: operating mode selector.
- SCAN:
6.-
- USB/microSD/Bluetooth modes: play/pause playback.
- radio mode: starts automatic station memory.
- AUX mode: no function.
7.- VOL+/ VOL– : overall speaker volume.
8.- PLAY REC: plays the recordings made.
OPERATION
MICROPHONE RECORDING
With this portable speaker you will be able to record your voice from the microphone inputs (wireless and
wired). Recording is done on the connected USB device. If there is none, it will record on the microSD card.
If you want to listen to the music while recording voice, you must do so using Bluetooth, auxiliary or FM radio
modes (in no case will this music be recorded).
To record, follow the steps below:
1.- One press of REC starts recording to USB.
2.- Press to stop/continue recording.
3.- To end the recording and start playblack of the recorded track, long press REC (on the speaker panel)
or PLAY REC on the remote control. Pressing MODE will return to the pre-recording playback mode.
Recordings are stored in a REC folder on the USB or SD card.
BLUETOOTH MODE
To send audio from your bluetooth device to the BOX-35LED speaker you will need to activate this function
on your transmitting device (smartphone, tablet, PC, etc.) and select Bluetooth mode on the speaker. On
your device, look for the speaker that will appear with the name BOX-35LED, link both devices and start
enjoying.
TWS FUNCTION
The TWS function allows you to play the same audio source through 2 stereo speakers in any of the speaker
modes (USB, microSD, Bluetooth, FM or AUX). For this function you will always have a main speaker playing
the left channel of the stereo signal (with more functions) and a secondary speaker playing the right channel.
To do this, you must have 2 BOX-35LED loudspeakers with this functionality and follow the steps below:
1.- Turn on both BOX-35LED speakers.
2.- On the secondary speaker, press the TWS button and the display will flash.
3.- Wait a few seconds and both speakers will start playing the same audio. The display of the secondary
speaker will stop flashing indicating that it is connected.
4.- Select the play mode on the main speaker.
- 4 -
1 5
6
2 7
3
4
8