HORI Fighting Stick Mini Manual De Instrucciones página 2

How to use the Turbo Functions
The Turbo Hold function allows continuous rapid fire without having to hold the button. (Pressing the assigned button deactivates this).
The following buttons can be set to Turbo or Turbo Hold mode:
A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /
Control Pad (UP / DOWN / LEFT / RIGHT)
* Control Pad (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo Hold mode and can only be used to set Turbo mode.
How to set
+
Turbo Mode
TURBO Button
Hold down the Turbo button and then
press the button that you want to set
to Turbo mode.
+
Turbo Hold
TURBO Button
Press the button once more, and the
button will remain in Turbo (Turbo Hold).
+
Turbo OFF
TURBO Button
Pressing the button again once more
will deactivate the Turbo function.
+
OFF
(All buttons)
TURBO Button Capture Button
Hold the TURBO Button and press the
Capture Button.
* The Turbo LED flash rate corresponds to the Turbo speed and will flash as long as one of the button is in Turbo mode.
* Pressing the HOME Button or unplugging the USB connector will deactivate all Turbo function and Turbo Hold settings.
When restarting game play, you will need to set the Turbo function again.
* Turbo Function may not be suitable for all software titles. Please try adjusting the Turbo settings or simply turn off Turbo.
* Turbo function will deactivate when you unplug the USB connector.
How to change Turbo Speed
You can adjust the Turbo mode to 3 different speeds.
While pressing the Turbo Button, press the + button to increase the Turbo speed in the following
order: 5 times/second → 10 times/second → 20 times/second
While pressing the Turbo Button, press the - button to decrease the Turbo speed in the
following order: 20 times/second → 10 times/second → 5 times/second
* Default Turbo speed is set to 10 times/second.
* The Turbo LED will flash at a rate corresponding to the Turbo speed for two seconds.
Turbo Indicator
Button OFF
Button ON
TURBO LED TURBO LED
will flash. will turn on.
Button OFF
Button ON
TURBO LED TURBO LED
will turn on. will flash.
If after deactivating the Turbo function
the Turbo Indicator LED does not turn
off, this means that there is still a
button set to Turbo/Turbo Hold.
OFF
If you forget which buttons you have
set to Turbo mode, deactivate them all
and reassign, as you require.
OFF
+
＋ Button
TURBO Button
+
− Button
TURBO Button
Troubleshooting
Refer to the following if the controller does not respond.
1. Update the Nintendo Switch console to latest firmware.
2. Reconnect this product and restart your console.
Unplug the controller from the Nintendo Switch dock.
Place the Nintendo Switch console onto the Nintendo Switch dock and turn it ON in TV mode.
Press and hold the Nintendo Switch console power button until the Power Option screen appears.
Using a separate controller (i.e. Joy-Con, Pro Controller, etc.), select [Power Options] → [Restart] to restart the Nintendo Switch
console.
Once the Nintendo Switch console restarts, wait for 10 seconds before reconnecting the controller to
the Nintendo Switch dock.
After you connect the controller, wait for 15 seconds. Press the A button once, then press and hold the HOME button for 5 seconds
to check if the controller responds.
If the Nintendo Switch console turns OFF during
dock. Turn ON the Nintendo Switch console and repeat the process from step
Specification
(W) 210mm x (D) 150mm x (H) 87mm
Size :
Weight : 500g
Cable Length : 2.5m
The normal function of the product may be disturbed by strong electro-magnetic interference. If so, simply reset the product to resume normal operation by
following the instruction manual (How to connect). In case the function does not resume, please relocate to an area which does not have electro-magnetic
interference to use the product.
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant electrical product or battery should not be disposed
of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any
applicable local laws or requirements for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of electrical waste. Applicable to EU countries only.
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
US
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects in material and workmanship for a period
of 90 days from the original date of purchase. If the warranty claim cannot be processed through the original retailer please address directly to HORI at
infous@hori.jp. Please visit http://stores.horiusa.com/policies/ for warranty details.
EU
Warranty
For all warranty claims made within the irst 30 days after purchase, please check with the retailer where the original purchase was made for details. If the warranty
claim cannot be processed through the original retailer or for any other inquiries pertaining to our products, please address directly to HORI at infoeu@hori.jp.
Please retain contact information for future reference.
The image on the package may differ from the actual product.
The manufacturer reserves the right to change the product design or speci ications without notice.
The wires are not to be inserted into socket-outlets.
The packaging must be retained since it contains important information.
HORI & HORI logo are registered trademarks of HORI.
Nintendo Switch is a trademark of Nintendo. Licensed by Nintendo.
, unplug the controller from the Nintendo Switch
.
Designed by HORI in Japan