Better Homes and Gardens Maddox BH16-084-099-69 Manual Del Usuario página 4

6
B
M6 x 65 mm Bolt
(4 used in this step)
4. With assistance, stand the Headboard (A) upright and position it near the final installation location.
5. Align and attach the metal bed frame (sold separately) to the Left and Right Legs (B and C), depending
on the mattress size that you own. For the queen size bed, select the outer mounting slots. For the full
size bed, select the inner mounting slots.
6. Insert the 65 mm Bolts (4) with the Small Washers (5 and 6) through the end brackets of the metal bed
frame and the mounting slots on the Legs (B and C). At the back of both Legs, fit the Small Flat Washer
(6), Small Lock Washer (5) and the Hex Nut (7) onto each 65 mm Bolts (4). Securely tighten the nuts
with the provided open wrench.
Assembly Instructions
A
4
6
5
4
④
6
M6 Hex Nut
(4 used in this step)
⑦
Small Lock Washer
(8 used in this step)
⑤
4
C
6
5
4
Small Flat Washer
(8 n this step)
used i
⑥
4