Icons And Functions Of The Camera Control Toolbar; Setting > Measurement - Optika Italy H Serie Manual De Instrucciones

6.4

Icons and Functions of the Camera Control Toolbar

Icon
Zoom In the Video Window
Horizontal Flip
Color / Gray
Display Cross Line
Compare stored image with the current live
image
Settings
The Setting function is relatively more complicated than the other functions. Here are more info about it:
6.4.1 Setting > Measurement
Global Precision
Calibration Line Width
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Curve
Left-click the along with the Measurement command mentioned above will unfold the corresponding attribute settings to
set the individual property of the Measurement Objects.
Function
Figure 4 - Measurement Setting Page
Used for setting digits behind the decimal point for measurement results.
Used for defining width of the lines for calibration.
Used for defining color of the lines for calibration.
Used for defining shape of the endpoints of lines for calibration.
Type:
Null: Means no endpoints.
Means rectangle type of endpoints. It makes alignment more easily.
Rectangle:
Icon
Zoom Out the Video Window
Vertical Flip
Video Freeze
Overlay
Browse Images and Videos in the SD Card
Check the LiteView Version
Page 11
Function