D-Link DAP-2695 Guia De Instalacion página 8

Your Setup is Complete
When you have completed the steps in this Installation Guide and configured
your for your network, your network should look similar to this:
To setup and manage the DAP-2695 from a computer, use one of the following
methods:
1. Connect a straight through Ethernet cable between the access point and your
computer.
2. Connect the access point to a switch or router and use a computer from a
computer that is also connected to that switch or router.
* Maximum Wireless signal rate derived from draft IEEE802.11ac specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
TECHNICAL SUPPORT
8
All manuals and user guides at all-guides.com
D-Link DAP-2695 Quick Install Guide
dlink.com/support