Invisia Kameleon LED Lightstrip K1 Manual Del Usuario página 3

Cloud Intelligence Account
Cloud Intelligence account: Sign up for a Cloud Intelligence account to control your Onvis Kameleon K1 light strip in
Android,iOS(NON-HomeKit), Alexa and Google Assistant system.
Android system
Requires Android 10.0 or later.
1. Download the latest Cloud Intelligence app from Google Play store.
2.Tap the + logo on the upper right to add K1. The app will search for the K1. (Make sure your Android phone joined a 2.4GHz
Wi-Fi network. 5GHz Wi-Fi is NOT supported.)
3.Tap to the right of 'Onvis K1 + Mac address'.
4.Use the Wi-Fi network in your android device to set up your K1 and input the Wi-Fi password. The Cloud Intelligence app will
disconnect from the Wi-Fi and need to connect back to the SAME Wi-Fi network. Your K1 will join your target Wi-Fi network
automatically.
(If you have more than 1 Wi-Fi network, the setup might fail if the Android device switches to other networks. Shut or forget
other networks temporarily when necessary)
5.Name your device and assign it to a room in the Cloud Intelligence app.
iOS system remote control
Requires iOS 14.1 or later. This will enable remote control of K1 without HomeKit hub. The Cloud Intelligence app will be used.
Onvis Home app will support Cloud Intelligence account later.
1. Setup K1 to HomeKit in the Home app of iOS system.
2. Download the latest Cloud Intelligence app from App store. (Onvis Home app will support later).
3. Tap the + logo on the upper right to add K1.
4. Tap to the right of 'Onvis K1 + Mac address' to add pairing. The K1 will be added automatically.
5. Name your K1 in the Cloud Intelligence app.
EN
2