Assembling Your E-Scooter - Eleglide S1 Manual Del Usuario

4. Assembling Your E-scooter

1) Get it out and unfold it: Unfold the handlebar
stem and fasten. Then unfold the kickstand to
support the e-scooter.
3) Display Assembling: Put it on the right
handlebar and fasten it in the right position with
the tool in the package.
2) Check the handlebar: Lift up the handlebar
and check if it's fasten. If handlebar is loose, Fold
the handlebar and fasted the screw with the
included hex wrenches.
4) Battery supply: Use the key to get the
battery supply. (Please take care of the key)
04
EN