Basic Operations; Power; Set The Clock; Play - Vieta Home VH-IS1000 Manual Del Usuario

Basic Operations

Power

You can use all the functions on main unit or
remote control after connecting to power supply
(called Standby Mode).
Turning the System On
Press the button to turn the system on from
standby mode.
Note:
The set will switch to last selected source.
Turning the System Off
Press button on main unit or press and hold
button on remote control to turn the system off
and go to Eco mode.
Note:
Be sure to unplug the power cord from the outlet
when the system is not in use for an extended
period of time.

Set the Clock

The built-in clock shows the correct time in the
display panel.
1. In standby mode, press and hold the CLOCK
button to activate the clock setting mode,
hour indicator will blink.
2. Set the hour with the

3. Press CLOCK button to confirm, minute
indicator will blink.
4. Set the minute with the
5. Press the CLOCK button to confirm, the built-
in clock starts operating and the seconds start
counting from 0.
All manuals and user guides at all-guides.com
button or button.

button or button.
 

Play

Play iPod/iPhone/iPad

You can enjoy audio from iPod/iPhone/iPad
through this unit.
1. Press the FUNCTION button to select DOCK
source.
2. Push down the OPEN area on the end to
rotate out the dock for iPod/iPhone/iPad.
3. Place an iPod/iPhone/iPad to the dock.
4. Start to play the connected iPod/iPhone/iPad.
-
To pause/resume play, press the
- To skip to a track, press the
buttons.
- To search during play: press and hold
H/G
, , buttons, then release to resume
 
normal play.
- To navigate through the menu: hold and
press M/CLOCK button, then press
BF
select, and press
Note:
When you use , to navigate through the menu,
 
the interval between each operation should
be within 5 seconds, or it will return to normal
function.
BF button.
H/G
, ,
 
, to
 
to confirm.
17