Environmental Protection - Worx Professional WU286 Traducción De Las Instrucciones Originales

Environmental protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
Disposal of an exhausted battery
pack
To preserve natural resources, please recycle or dispose of
the battery pack properly. This battery pack contains nickel-
metal hydride batteries. Consult your local waste authority
for information regarding available recycling and/or disposal options.
Discharge your battery pack by operating your saw, then remove
the battery pack from the saw housing and cover the battery pack
connections with heavy duty adhesive tape to prevent short circuit
and energy discharge. Do not attempt to open or remove any of the
components.
All manuals and user guides at all-guides.com
9
Plug replacement
(UK & Ireland only)
If you need to replace the fitted plug then follow the instructions
below.
IMPORTANT
The wires in the mains lead are colored in accordance with the
following code:
BLUE =NEUTRAL
As the colors of the wires in the mains lead of this appliance may not
correspond with the colored markings identifying the terminals in
your plug, proceed as follows. The wire which is colored blue must
be connected to the terminal which is marked with N. The wire which
is colored brown must be connected to the terminal which is marked
with L.
Note: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
Brown L (live)
(neutral)
Outer sleeve
Cable grip
firmly clamped
BROWN = LIVE
Warning!
Never connect live
or neutral wires to
the earth terminal
of the plug. Only
fit an approved
13ABs1363/A plug
and the correct
rated fuse.