Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

ASSEMBLY INSTRUCTIONS
BH37-084-099-01
050276998204
WARNING:
The maximum weight load capacity of
the chair is 300 lbs (136 kgs) and the
maximum weight load capacity of the
table is 50 lbs (22 kgs). Exceeding
capacity may result in collapse and
possible injury.
CHEYENNE PRODUCTS
** THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
DO NOT RETURN THIS PRODUCT TO THE STORE OR CONTACT THE RETAILER
**
In the unlikely event that you have a problem with your merchandise, o
Please contact our dedicated customer service team at 1-800-737-5267 or email
customerservice@cheyenneproducts.com to request for the missing parts or assistance
for your merchandise. Our offices are open Monday to Friday from 8:00 AM to 5:00 PM -
(CST) - excluding major holidays. Our customer service representatives are
committed to resolving your problem as quickly as possible.
** Assemble on a soft surface to prevent damage to product finish.
** Carefully remove all parts and hardware from the box and make sure that no parts or hardware
listed on the assembly instructions are missing.
** Cheyenne Products is committed to helping protect the environment for future
generations. We encourage you to reuse or recycle all of the materials used in
the packaging of this product.
r missing parts,

Publicidad

loading

Resumen de contenidos para Cheyenne Products BH37-084-099-01

  • Página 1 ** Carefully remove all parts and hardware from the box and make sure that no parts or hardware listed on the assembly instructions are missing. ** Cheyenne Products is committed to helping protect the environment for future generations. We encourage you to reuse or recycle all of the materials used in...
  • Página 2: Parts List

    HARDWARE: 1) BOLT (35PCS) 3) GLASS CAP(8PCS) 2) BOLT (4PCS) 4) ALLEN WRENCH (1PC) 1/4” x 1/2” 1/4” x 1” PARTS LIST: B) HOLDER(1PC) D) MIRROR(1PC) A) TABLE FRAME(1PC) C) TABLE LEG(4PCS) F) SMALL TEMPERED H) CHAIR LEG(4PCS) E) BIG TEMPERED G) CUSHION WITH GLASS(1PC) GLASS(1PC)
  • Página 3 A.REVERSE THE ASSEMBLED PART. ATTACH HOLDER (B)TO TABLE FRAME(A) AS SHOWN USING FOUR BOLTS(2). THEN FULLY TIGHTEN THE BOLTS. 2)BOLT (4PCS) 1/4” x 1” A.FASTEN EIGHT GLASS CAPS(3) ON THE RIGHT PLACE AS SHOWN. THEN PLACE BIG TEMPERED GLASS(E) AND SMALL TEMPERED GLASS(F) ON TABLE FRAME AND HOLDER SEPARATELY.
  • Página 4 CLEANING: Wipe with a soft cloth, never use harsh chemicals or abrasive cleaners for polishing. Cheyenne Products is committed to helping protect the environment for future generations. We encourage you to reuse or recycle all of the materials used in the packaging of this product.
  • Página 5: Important Warranty Information

    IMPORTANT WARRANTY INFORMATION SAVE THIS INFORMATION FOR FUTURE REFERENCE * Our products are produced under the strict quality control standards and meet or exceed all applicable industry standards and consumer regulations. Your merchandise is warranted for ninety (90) days from the date of purchase against manufacturing defects.
  • Página 6 ASSEMBLY INSTRUCTIONS BH37-084-099-01 UPC CODIGO DE BARRAS# 050276998204 ADVERTENCIA La capacidad máxima de carga de la silla es de 136 kg (300 lbs) y la capacidad de carga máxima de la mesa es de 22 kg (50 libras). El exceso de capacidad puede causar...
  • Página 7: Lista De Partes

    FERRETERÍA: 1) PERNO (35PCS) 2) PERNO (4PCS) 3) TAPA DE VIDRIO (8PCS) 4) LLAVE ALLEN (1PC) 1/4” x 1/2” 1/4” x 1” LISTA DE PARTES: B) POSEEDOR(1PC) C) TABLA PATA (4PCS) D) ESPEJO(1PC) A) MARCO TABLA (1PC) F) PEQUEÑO VIDRIO H) PATA DE LA SILLA E) GRAN VIDRIO G) COJÍN CON...
  • Página 8 PASO 2. A. REVERSE LA TAP DE LA PARTE DE MONTAJE (B) AL CUADRO DE LA MESA (A) COMO SE MUESTRA. UTILICE CUATRO TOERNILLOS (2) DESPUES APRIETE LOS PERNOS COMPLETAMENTE. 2) PERNO (4PCS) 4) LLAVE ALLEN (1PC) 1/4” x 1” PASO 3.
  • Página 9 PASO 5. A. COLOQUE EL COJIN CON MARCO (G) DELANDE SOBRE UNA SUPERFICIE LISA COMO SE MUESTRA. ADJUNTE LAS CUATRO PIERNAS (H) AL COJIN CON MARCO (G) USANDO SEIS PERNOS (1) COMO SE MUESTRA. ENTONCES AJUSTE TOTALMENTE LOS PERNOS. 1) PERNO (16PCS) 4) LLAVE ALLEN (1PC) 1/4”...
  • Página 10 INFORMACIÓN IMPORTANTE DE GARANTÍA * GUARDE ESTA INFORMACIÓN PARA FUTURA REFERENCIA * Nuestros productos son fabricados con los más estrictos controles y normas de calidad y cumplen o exceden todos los requisitos de rigor de la industria, además de cumplir con todas medidas de protección al consumidor. Su mercancía está...