MANUALE
SUNWAY
SI
TM
D'USO
to monitor inverters remotely.
6.3.5 Web Page Configuration
The connection has been successfully configured through the APP in the
previous step. There is no need to configure through the Web.To configure
using the Web for the first time, follow the instructions below.
① Connect WiFi hot spot (For example:DTU:XXXXX )
Figure 6.7
②
Web to http://10.10.176.1 (Account: admin, Password: admin ) to set
over webpage.
Note: Language can be set by clicking "LANGUAGE"in the top right corner.
95/156