Troubleshooting Guide - Samba CLEAN FORCE Manual De Instrucciones

Clean the motorized brush roller
1. Turn over the brush motorized, turn the safety lock to
the "Open Padlock" position and pull the tab to lift.
2. Carefully remove the roller and remove the dirt.
3. Repeat the operation in reverse to place the roller, turn
the safety lock to the "Padlock closed" position.
TROUBLE SHOOTING GUIDE
PROBLEM
Handheld vacuum
cleaner does not work
Handheld vacuum
cleaner cannot pick-up
dust; suction power
become weak
The motorized brush
does not work
20
POSSIBLE REASON
1. Batteries discharged
2. Dead battery (battery
won't hold charge).
3. Connector between
the unit and the charger
are dirty.
4. No power in
electrical outlet
supplying transformer.
5. Charger is plugged
in.
1. Dust container is full.
2. Dust filter
needs cleaning or
replacement.
3. Unit needs
recharging.
1. Brush light or roller
does not work
2. The roller does not
rotate
POSSIBLE SOLUTION
1. Charge unit.
2. Call customer service
3. Wipe and clean dirt
from connector.
4. Check fuse or
breaker, replace fuse/
reset breaker.
5. Unplug charger.
1. Empty dust container
2. Remove dust filter
assembly and check
for object(s) in suction
inlet and remove. Clean
or replace dust filter
assembly.
3. Charge unit.
1. Check the tube and
brush connections
2. It is obstructed
3. Check if it is correctly
placed.