Commissioning - Festo Robotino 8049096 Descripción

6.2 Commissioning

1. If necessary, mount the alignment arms to the charging station's basic housing (see section 6.3).
2. Prepare the charging station for the respective floor (see section 6.6).
– For carpeting: adhere the Velcro strips
– For a smooth floor: adhere the rubber feet
3. Connect the power supply unit supplied with Robotino
Note
In the case of Robotino
necessary to use the included 6/2-pole adapter in order to connect the power supply unit to the
charging station.
4. Mount the contact plug to Robotino
Caution!
When the charging contact is activated, maximum power from the power supply unit is applied to
the charging contacts.
© Festo Didactic 8049097
® 3 versions shipped between January 2014 and December 2015, it may be
® 3 and wire it.
®
3 to the charging station's socket.
25