Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY RULES FOR THE FLOORING CUTTER
1. READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE
OPERATING THE MULTI-FLOORING CUTTERS.
2. If you are not thoroughly familiar with the operation of Multi-flooring Cutter,
obtain advice from a qualified instructor or call 630-916-9100 USA
3. Stay alert. Do not operate while under the influence of drugs, alcohol, or
medication.
4. Always wear safety approved eye protection with side shields(ANSI Z87.1)
5. Keep work area free of debris.
6. Keep children and unauthorized persons away from the Multi-flooring Cutter
and work area.
7. Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. Use the right tool. Do not force the Multi-flooring Cutter or use it for a job for
which it was not designed; use only on approved materials.
9. Keep the blade sharp. A dull blade will not perform properly.
10. Always keep hands away from blade while operating or carrying the cutter.
11. Do not alter or misuse this tool. The Multi-flooring Cutter is precision built;
modifications not specified in this manual may result in a dangerous and
unsafe environment.
12. Maintain the Multi-flooring Cutter with care. Keep Blade sharp and clean.
Follow instructions for changing accessories.
13. Use only recommended accessories. The use of improper accessories may be
hazardous and cause injuries.
14. Never leave the Multi-flooring Cutter unattended. Secure the handle with the
lock chain when not in use.
2
Publicidad
