Connect The Power - Cuckoo CAC-I0510FW Manual Del Usuario

Names and Functions of Control / Display Panel
Turbo
Fan Speed Button
Light Control Button

Connect the power

Please confirm that the input voltage is 100-240V, 50Hz/60Hz, and ensure that the power
plug and your hands are dry before you insert the power cord plug into the outlet.
Note: Contact Customer Service when the power cord or plug is damaged or the power
outlet is loose.
We strongly recommend that the damaged parts be repaired or replaced.
To replace the damaged power cord or plug, please visit Cuckoo's website and contact
Customer Service.
8
1. To change the fan speed, press the fan speed button.
The fan speed will cycle between SLEEP, TURBO, and AUTO and will
be indicated by a white light below the name.
2. SLEEP will have the fan on the lowest speed.
TURBO will have the fan on the highest speed.
AUTO will adjust the speed according to the current air quality.
Note : When the sleep mode is activated, LED turns off.
3. When the air quality is poor, the fan speed is automatically adjusted
to TURBO, and the light ring will display red. When the air quality is
moderate, the fan speed is automatically adjusted to MEDIUM, and
the light ring will display yellow. When the air quality is excellent, the
fan speed is automatically adjusted to LOW, and the light ring will
display blue.
Air Pollution Level
Color
1. To adjust the lighting, touch the light control button repeatedly to dim
the light to desired preference.
2. To turn off the light, touch the light control button repeatedly until
LED turns off.
Note : The light control button couldn't operate in the status of shutdown.
If the light ring keeps blinking red, the filter needs to be replaced.
Poor Moderate
Red Yellow
Excellent
Blue