Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the MOLDINGS (M
and N) and SMALL UPRIGHT (D).
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
10F
N
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
M
414729
D
Page 5
Publicidad
