Product Setup; Setup Mode; Add Device - iOttie Aivo Boost Manual Del Usuario

02 Product Setup
Power On
Plug the Aivo Boost into your
vehicle's 12V power socket,
then start the engine.

Setup Mode

Setup Mode will begin
automatically.
The LED ring will flash orange
as you are redirected to the
Alexa App to add a new device.

Add Device

In the Alexa App, navigate to
Add Device > Auto Accessory,
then select iOttie Aivo
Boost (####) from available
devices, and pair device. Allow
location access and make sure
Bluetooth is discoverable and
turned on.
08 EN
Alexa is Ready
Once device is paired and
connected, the LED ring will
flash blue three times before
turning off. Alexa is now ready
to use.
*Device will now connect automatically when it is
powered on and your smartphone is in close range.
*To unpair device, hold the wake/mute button for 5
seconds until it flashes orange and select "Forget
Device" from phone's Bluetooth settings.
Updating Device Firmware via
iOttie Connect App
For an optimal user experience, make
sure you have the most up-to-date device
firmware installed from the iOttie Connect
App. Follow instructions for updating
device firmware in the app.

Product Setup

09