Publicidad
2 Spare parts / 备件 / Ersatzteile / Pièces de rechange / Piezas de recambio /
Pezzi di ricambio
EN
Fixed roller
Guide roller
3 Application / 应用 / Anwendung / Application / Aplicación / Applicazion
1
2
3
EN
Material and field of use
•
Wheels: Polyurethane
•
Cart: Stainless steel
•
Use in moist environment
Mounting
1. Remove the load plate.
2. Turn the levelling feet out of the weighing platform.
3. Replace each levelling foot with a stud (2) and an M10 nut (1).
4. Place the weighing platform on the cart. For PBA639 and PBD659, align each stud to the outer center of the
installation hole (see A). For PBA436 and PBA439, align each stud to the inner center of the installation hole (see
B).
5. Adjust the studs until the weighing platform is level.
6. Fasten each stud (2) to the weighing platform with the M10 nut (1). Torque 25 Nm.
7. Fasten each stud (2) to the cart with a M12 nut (3). Torque 30 Nm.
Operation
S Place the cart on a level and firm underground in order to achieve correct weighingg results.
S Observe the permissible maximum load.
Note
A terminal-specific bracket may be required to mount the terminal. Please refer to the operating instructions of the
terminal.
2
CN
DE
Bockrolle
定向轮， 前轮
Lenkrolle
万向轮， 后轮
FR
ES
Roue fixe
Rueda de apoyo Ruota fissa
Roue pivotante Rueda de guía Ruota sterzante 72228056
A
IT
Order #
72228057
B
Publicidad
