Standard Accessories - HIKOKI UR 18DA Instrucciones De Manejo

○ Only below slide battery could be used
(Model) BSL36B18: 18 V 8000 mAh Lithium battery
(Manufacture) Koki Holdings Co., Ltd.
○ The plug of external adapter was used as disconnect
device, the socket-outlet shall be easily accessible
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UR18DA : Cordless radio
For applicable power supplies see user
instructions.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Only use Koki Holdings Co.,Ltd's slide battery
Battery pack charge level over 75%
Battery pack charge level 50 to 75%
Battery pack charge level 25 to 50%
Battery pack charge level under 25%
Before
charging
While charging Lights
Charging
Pilot lamp
complete
(red)
Charging
impossible
Overheat
standby
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for
Blinks 0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for
Blinks 0.5 seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for
Flickers 0.1 seconds. (off for 0.1 seconds)
Lights for 1 second. Does not light for
Blinks 0.5 seconds. (off for 0.5 seconds)
Output terminal for adapter
Indoor use only (AC Adapter)
Class II product - Double Insulated - No
earth required, for external power supply (AC
Adapter)

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 159.
Standard accessories are subject to change without notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger.
Firmly insert the battery into the charger. (Fig. 3).
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
Table 1
7
English
Malfunction in the battery or
the charger
Battery overheated. Unable
to charge. (Charging will
commence when battery cools)