Storage; Factory Reset - Blackmagic Design Cloud Store Manual De Instrucciones

Storage

Enable Read Only
The storage settings include a checkbox to enable read only and a factory reset button.
When the storage requires formatting, a format indicator will appear.
Check this option to set your Blackmagic Cloud Store's storage to 'read only'. When enabled,
no additional files can be written to the drive.
Format
Occasionally, it may be necessary to format your Blackmagic Cloud Store's internal storage.
Your cloud store will let you know when formatting is required by displaying a 'format required'
message on the home page.
It's worth noting that formatting the internal storage will delete all files stored on the drive.
We recommend copying them to another drive before formatting.
To format the internal storage:
1 Click the 'format drive' button and then click 'format'.
2 In the first confirmation dialog box, click the 'format' button.
3 A second dialog box will ask you to confirm your selection. Click 'erase' to start
the formatting process, or click 'stop' to exit without formatting.
4 A percentage indicator will display the formatting progress.

Factory Reset

The factory reset button lets you restore your Blackmagic Cloud Store to its factory default
state. Any files that you have stored on the unit will not be changed.
Settings 17