Ec Declaration Of Conformity - AEG BK18C Manual Original

Ocultar thumbs

Contenido

página de 99

/ 99
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

To avoid injury and damage, never immerse the tool, removable

battery or charger in liquid or allow liquid to penetrate them.

Use only System GBS chargers for charging System GBS battery

packs. Do not use battery packs from other systems.

Never break open battery packs and chargers and store only in dry

rooms. Keep dry at all times.

To reduce the risk of re, personal injury, and product damage due

to a short circuit, never immerse your tool, battery pack or charger

in uid or allow a uid to ow inside them. Corrosive or conductive

uids, such as seawater, certain industrial chemicals, and bleach or

bleach containing products, etc., Can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The in ator is intended to in ate items such as car tires, bike tires,

lawn equipment tires, sports equipment, air mattresses, beach toys

and other in atables.

Do not use this tool to ll air tanks or shocks. Do not use this tool as

a breathing device. Do not use this tool to spray chemicals.

MAINTENANCE

Remove the battery pack before starting any work on the

appliance.

The ventilation slots of the machine must be kept clear at all times.

Service and repair work may only be carried out by authorised

specialist workshops.

If the tool does not start or operate at full power with a fully char-

ged battery pack, clean the contacts on the battery pack.

If the tool still does not work properly, return the tool, charger and

battery pack, to a AEG service facility for repairs.

Use only AEG accessories and spare parts. Should components

need to be replaced which have not been described, please contact

one of our AEG service agents (see our list of guarantee/service

addresses).

If needed, an exploded view of the tool can be ordered. Please state

the Article No. as well as the machine type printed on the label

and order the drawing at your local service agents or directly at:

Techtronic Industries GmbH, Max-Eyth-Straße 10,

71364 Winnenden, Germany.

BATTERIES

Temperatures in excess of 50°C (122°F) reduce the performance of

the battery pack. Avoid extended exposure to heat or sunshine (risk

of overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, the battery packs have to be fully char-

ged, after use. Battery packs which have not been used for some

time should be recharged before use.

To obtain the longest possible battery life remove the battery pack

from the charger once it is fully charged.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 27°C and

away from moisture.

Store the battery packs in a 30% - 50% charged condition.

Every six months of storage, charge the pack as normal.

Do not dispose of used battery packs in the household refuse or by

burning them. AEG Distributors o er to retrieve old batteries to

protect our environment.

Do not store the battery pack together with metal objects (short

circuit risk).

Rechargeable batteries are to be removed from the appliance

before being charged;

If the appliance is to be stored unused for a long period, the

batteries should be removed.

Exhausted batteries are to be removed from the appliance and

safely disposed of.

The supply terminals are not to be short-circuited.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legisla-

tion requirements.

Transportation of those batteries has to be done in accordance with

local, national and international provisions and regulations.

The user can transport the batteries by road without further

requirements.

Commercial transport of Lithium-Ion batteries by third parties is

subject to Dangerous Goods regulations. Transport preparation and

transport are exclusively to be carried out by appropriately trained

persons and the process has to be accompanied by corresponding

experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated

to prevent short circuit. Ensure that battery pack is secured against

movement within packaging. Do not transport batteries that are

cracked or leak. Check with forwarding company for further advice.