Messoa NDF820 Guia De Inicio Rapido página 8

2. Use the tapping screws to secure the camera base to the surface.
tion Tip Note
1. Use the machine type screws if you are attaching the camera to
a pendent mounting. Use the tapping type screws for all other
surfaces.
2. For cement surfaces, insert the "Plastic Anchors" into the holes. For
softer surfaces, do not use the "Plastic Anchors".
3. Use the Rubber Feet for surface mounting.
Adjusting Camera Angle
Check the monitored view by wiring the RCA jack to a monitor. With an
external monitor connected, you can adjust pan and tilt angles of the
camera for appropriate or better view.
Pan Adjustment: Rotate the lens base to adjust the horizontal angle.
Tilt Adjustment: Tilt the lens base to adjust the vertical angle.
6 NDF820/NDF820E
All manuals and user guides at all-guides.com
RCA Jack for
Composite Video Output
l Quick Start Guide